TSS type TRE and Stefa type CC
Trelleborg Type TRE are seals with a completely rubber covered outer diameter and a secondary dust lip which protects the other lip against dust and other fine contaminants. This type of radial oil seal is recommended for use in polluted environments. Radial Oil Seals are also known as Rotary Shaft Seals, consisting of a rubber sealing lip, metal case and a spiraled tensioning spring Their function is to keep oil and grease within the system dirt and dust out.
Size Range:
10 mm to 250 mm
Temperature:
-40 °C to 200 °C
Pressure (max):
0,05 MPa
Speed (max):
15 m/s
Material Information for the product(s) on this page
N7M
Colour:
Black
Basic Material:
NBR/metal
Commercial Description:
A 70 durometer NBR bonded to a steel case. Comes with a steel spring. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperaturs range of between -30 °C and +100 °C. NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
N8M
Colour:
Black
Basic Material:
NBR/metal
Commercial Description:
An 80 durometer NBR bonded to a steel case. Comes with a steel spring. The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
V8V
Colour:
Brown
Basic Material:
FKM/metal
Commercial Description:
An 80 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C. FKM is also often used with mineral based oils and greases at high temperatures.
VCV
Colour:
Brown
Basic Material:
FKM/metal
Commercial Description:
A 75 durometer FKM with a standard steel case. Comes with a stainless steel spring. FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and ageing. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C. FKM is also often used with mineral based oils and greases at high temperatures.
| Product No. | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | Add to Enquiry | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product No.TREC00350-4NV11 | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TREC00350-N7MMR | Shaft diameter, d1 h11 | Bore diameter, d2 H8 | Width, b | Material Type | ||||||
| Product No.TRE000080-N7MMK | Shaft diameter, d1 h11 8 | Bore diameter, d2 H8 16 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000080-N7MMR | Shaft diameter, d1 h11 8 | Bore diameter, d2 H8 16 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000120-VCBVR | Shaft diameter, d1 h11 12 | Bore diameter, d2 H8 19 | Width, b 5 | Material Type [FKM/metal] | ||||||
| Product No.TRE000140-N7MMP | Shaft diameter, d1 h11 14 | Bore diameter, d2 H8 26 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000150-N7MM5 | Shaft diameter, d1 h11 15 | Bore diameter, d2 H8 24 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000160-N7MM5 | Shaft diameter, d1 h11 16 | Bore diameter, d2 H8 24 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000180-N8MM5 | Shaft diameter, d1 h11 18 | Bore diameter, d2 H8 28 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000200-4V012 | Shaft diameter, d1 h11 20 | Bore diameter, d2 H8 30 | Width, b 8 | Material Type [FKM/metal] | ||||||
| Product No.TRE000206-4H911 | Shaft diameter, d1 h11 20.64 | Bore diameter, d2 H8 32 | Width, b 6 | Material Type [HNBR/metal] | ||||||
| Product No.TRE000220-N7MMP | Shaft diameter, d1 h11 22 | Bore diameter, d2 H8 37 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000220-VCBVR | Shaft diameter, d1 h11 22 | Bore diameter, d2 H8 37 | Width, b 7 | Material Type [FKM/metal] | ||||||
| Product No.TRE000350-N7MMP | Shaft diameter, d1 h11 35 | Bore diameter, d2 H8 80 | Width, b 12 | Material Type [NBR/metal] | ||||||
| Product No.TRE000350-N7MMR | Shaft diameter, d1 h11 35 | Bore diameter, d2 H8 80 | Width, b 12 | Material Type [NBR/metal] | ||||||
| Product No.TRE000450-4N011 | Shaft diameter, d1 h11 45 | Bore diameter, d2 H8 60 | Width, b 7 | Material Type [NBR/metal] | ||||||
| Product No.TRE000470-4NV11 | Shaft diameter, d1 h11 47 | Bore diameter, d2 H8 90 | Width, b 10 | Material Type [NBR/metal] | ||||||
| Product No.TRE000500-N7MM5 | Shaft diameter, d1 h11 50 | Bore diameter, d2 H8 68 | Width, b 10 | Material Type [NBR/metal] | ||||||
| Product No.TRE000550-4N011 | Shaft diameter, d1 h11 55 | Bore diameter, d2 H8 68 | Width, b 8 | Material Type [NBR/metal] | ||||||
| Product No.TRE000650-4N011 | Shaft diameter, d1 h11 65 | Bore diameter, d2 H8 80 | Width, b 8 | Material Type [NBR/metal] | ||||||
| Product No.TRE000650-V8BV5 | Shaft diameter, d1 h11 65 | Bore diameter, d2 H8 80 | Width, b 8 | Material Type [FKM/metal] | ||||||
| Product No.TRE000680-N7MM5 | Shaft diameter, d1 h11 68 | Bore diameter, d2 H8 85 | Width, b 10 | Material Type [NBR/metal] | ||||||
| Product No.TRE000680-N7MMP | Shaft diameter, d1 h11 68 | Bore diameter, d2 H8 85 | Width, b 10 | Material Type [NBR/metal] | ||||||
| Product No.TRE000700-4N011 | Shaft diameter, d1 h11 70 | Bore diameter, d2 H8 85 | Width, b 8 | Material Type [NBR/metal] | ||||||
| Product No.TRE000880-N7MVR | Shaft diameter, d1 h11 88 | Bore diameter, d2 H8 160 | Width, b 13 | Material Type [NBR/metal] | ||||||